P201

Nettverkskamera
Tilgjengelig
5 400,00 NOK
Antall:
Nettverkskamera som kan kobles til det eksisterende datanettverket (LAN/WAN).
Kan f.eks benyttes flere steder, med sentral lagring over internett.

System
Windows 2000 SP4 or Windows XP/Windows ME/Windows 98
Internet Explorer 6.0
DirectX 9.0c
CPU: 32 Bits RISC Processor
ROM: 2M Bytes Flash ROM
RAM: 16M Bytes SDRAM
WatchDog: Chip to monitor out tolerance system voltage and abnormal program execution

Connector
Two LEDs to indicate network and power/system status
One RJ-45 for Ethernet
One RS-232 serial port for external console
One RS-485 port for PTZ (pan/tilt/zoom) camera control
Four fully opto-isolated alarm inputs and one 3A, 125VAC/ 30VDC Relay output

Video Channel
1/4” internal CCD
HORIZONTAL resolution: More than 380 lines
1 Lux (F2.0)

Network Interface
Ethernet (10/100 Base-T)

Protocols
TCP/IP, UDP, ARP, ICMP, HTTP, FTP, Telnet, SMTP, DHCP

Performance
Network throughput: Max. Up to 800K bytes / sec.
30 connections simultaneously
Up to 30/ 25 fps

Lens
Standard Package: equipped with CS mount Focal length 6.0mm F1.8 Lens.
Supporting of Direct Drive Lens; Build-in VR for DC level adjustment.
Optional: Focal lens 4.0mm, Auto DC Iris F1.2~64 Lens
Vari-Focal lens 3.2~10mm, Auto DC Iris F1.4~360 Lens

CCD adjustment
White Balance: Auto
Automatic Gain Control: Open / Close
Electronic Shutter: Open / Close

Image Compression
JPEG; Motion JPEG

Video Adjustment
Brightness, Contrast, Hue, Saturation, Video quality adjustment

Resolutions
NTSC: 704x480, 352x240, 176x112 PAL: 704x576, 352x288, 176x144

Function
Supports remote recording
Supports display rotation
Supports full screen display
Multi-Languages support

Event management
Programmable Event Scripting
Triggered:
1.Time (Frequency)
2.Sensor Input
3.Motion Detection
4.Video/ Network status
5.CGI trigger
Action:
1.Store image to internal buffer (2M Bytes pre and post-alarm)
2.FTP image to remote site
3.E-mail image to specific account
4.HTTP server push to remote site
5.Relay output to control external devices
6.Alert transmission to an HTTP listen server (for developers)

Installation
Using ARP & Ping or IP-Installer software to assign the IP address

Firmware Upgrade
Remote upgrade by FTP
Customized web UI is upgradeable via FTP and Telnet

Client PC Requirements
Standard browser such as Microsoft 5.x or above, running on Windows Me/ 2000/XP, Linux.

Security
Multi-tiered access control

Recording
Free 4-CH recording software

Operating Temperature
5°C ~50°C (40°F ~ 125°F)

Input Voltage
DC 12V

Power Consumption

Dimension
135(L)*85(W)*40(H) mm

Net Weight
0.57 kg (excluding power adapter)

Accessories
CD Title with manual/software
Quick Installation Guide
Ethernet Cable
CS Ring adjust tool
Power Adapter
Stand for Desktop/Wall/Ceiling
One cable convert MiniDin to Dsub, to connect Com port or GPIO